Welch Allyn Connex VM data management system - User Manual - Manual (Page 31)

Searching
Search for patients
1. Click the Search tab or go to View > Search.
2. Click Patients.
3. Enter your search criteria.
4. Click Search.
Build or edit a saved search
The saved search builder enables you to create searches that use more criteria than basic
searches provide. You can also control what information (which columns) will appear in the results
of saved searches. After you save a search, it is accessible from the Search page. If a saved
search will be needed regularly, you might also want to add it to the Show list on the Home
page.
1. Open the Search page either of these ways:
• Click the Search tab.
• From the menu bar, go to View > Search.
2. Click Saved search.
3. Click Build or edit a saved search.
The Build or Edit a Saved Search window appears.
4. Follow the instructions on the screen.
When you click Finish, the search is saved.
To use a saved search any time, return to the Search page, select Saved search, and click
under Select an existing saved search.
To control which saved searches appear in the Show list on the Home page, go to Tools >
Options > Application > Searches.
Search for unreconciled data
Unreconciled data can occur when the data imported from a device does not match any patient
records in the system. You can search for unreconciled data and print a report of that information,
or you can delete the unreconciled data from the Connex VM system.
1. Click the Search tab or go to View > Search.
2. Click Unreconciled data.
27