Welch Allyn Connex VM data management system - User Manual - Manual (Page 16)

The Capture Vital Signs window appears.
2. Confirm that the patient name at the top of the window is correct.
3. If you are taking an NIBP measurement, click START.
4. (Optional) Add information or revise the readings.
• Select modifiers in the lists.
• Type values in the numerics boxes.
• Type in the Comments box.
• Manually enter or revise information: Click Enter manually. Type values in the numerics
boxes for NIBP, pulse rate, SpO2, temperature, hemoglobin, or weight. In the lower part of
the window, click and type in the Test taken area to change the date or time. During
manual entry, data collection from the device is suspended.
5. Click Save.
12 Transferring vital signs readings into the system Welch Allyn Connex® VM data management system