Welch Allyn Connex VM data management system - User Manual - Manual (Page 18)

Import multiple patients' saved readings
You can import multiple patients' saved readings from one vital signs device into the Connex VM
system. This procedure applies to wired vital signs devices that are compatible with the system.
WARNING Whenever you enter data into the Connex VM workstation, verify that
the data is correct before you save it.
WARNING When you initiate data import into the Connex VM system from a vital
signs device, select all data that needs to be retained. When the Connex VM system
imports data, vital signs data (including nonselected data) may be cleared from the
device.
1. With the vital signs device connected to the Connex VM workstation, in the Connex VM menu
bar, click Devices > Import data from device.
The Import Data from Device window appears.
2. (Optional) Clear check boxes next to undesired items.
3. (Optional) Edit the information.
a. Click the reading that you want to edit.
b. Click Edit.
c. Confirm that the patient ID is correct.
d. Type or revise values in numerics boxes, select modifiers in lists, or type in the
Comments box.
e. Click Save.
Manually entered information is marked with an asterisk (*).
4. Click Import.
An “Import complete” message appears.
5. Click Done.
14 Transferring vital signs readings into the system Welch Allyn Connex® VM data management system