Welch Allyn AM 232 Manual Audiometer - User Manual - Manual (Page 26)

26 12-16-08
Preliminary check
1. Prior to testing, ensure that the power cord and earphone cords are plugged in
(R1 and R3 respectively).
2. Turn the audiometer on.
3. Select the desired tone type (F9 - pulsed, steady or FM).
4. Make whatever notations your procedure requires on the audiogram form.
CAUTION
!
Always handle earphones with care. Neither drop them nor permit
them to be squeezed together. Severe mechanical shock may change their operating
characteristics and require their replacement.
IMPORTANT: Always clean and maintain your earphone cushions, for hygiene
purposes. Check periodically for cracking or signs of wear. Cleanse cushions
daily or after each use (depending upon population being tested). Use a
solution of diluted alcohol or mild soap and water, taking care not to get any of
the cleaning solution into the earphone speaker. Use earphones only when
completely dry. Insert the earphone cords between the earphone cushions
during storage to prevent damage from mechanical shock.