Welch Allyn AM282 Audiometer - User Manual - Manual (Page 10)

6 Introduction Welch Allyn AM282 Audiometer
Bottom panel
Stand-by.
Right Ear.
Left Ear.
Patient Response Button.
AC Power
WARNING Do not turn on/off system power while a patient is wearing the
headsets or internal earphones.
WARNING Use only the provided power supply. The AM282 Audiometer
provided power supply should only be connected to a power source meeting the
following range: 90-246VAC, 47-63Hz. In North America, the power source should
be a maximum of 120VAC.
Symbol Description
B1 Serial number of system
B2 Battery compartment
See “Replacing the batteries” on page 10 for detailed
instructions.
B1 B2