Vintage Cellars 1800 Series CellarPro - Manual (Page 22)

22
Advanced Operation
CellarPro cooling systems can be programmed with advanced settings to achieve
more control over conditions inside the cellar. Conditions like humidity, the
Temperature Differential, and alarm settings all can be modified for custom
applications. To access the advanced settings, do the following:
 Press the “Set” button and the “Down” button together at the same time, and
hold for three seconds. Then, use the “Up” or “Down” button to scroll to the
following screen:
HUMIDITY: The factory preset for this setting is “3”.
If the humidity inside the cellar is too low, press the “Set” button,
then use the “Up” button until the desired setting is reached.
The recommended range for this setting is 0-6.
TEMPERATURE DIFFERENTIAL: The factory preset for this
setting is “4” without a bottle probe, and “1” with a probe.
When added to the set point, this setting determines the
temperature at which the cooling unit will cycle on. The
recommended range for this setting is 4 or 5 unless using a bottle
probe
in liquid , in which case the recommended setting is 1.
HIGH TEMPERATURE ALARM: The factory preset for this
setting is “70”.
This setting designates the High temperature inside the cellar at
which the alarm is triggered. We recommend leaving this setting
at the factory preset.
LOW TEMPERATURE ALARM: The factory preset for this setting
is “45”.
This setting designates the Low temperature inside the cellar at
which the alarm is triggered. We recommend leaving this setting
at the factory preset.
ENERGY SAVINGS MODE DIFFERENTIAL: The factory preset
for this setting is “4”.
This setting increases or decreases the Temperature Differential
for the Energy Savings Mode. The recommended range for this
setting is 2-4.