Canon VB-C60B - Manual (Page 81)

2-23
VBAdmin Tools
Preset Setting Tool
Note
● The Panorama Preview may be slightly different from the actual image. After setting
the presets, make sure that the presets are correctly reflected in the Admin Viewer.
● When using the manual focus, adjust the focus manually while watching the video
via the Admin Viewer. After manual focusing completes, click “Get value” to set the
preset.
● When changing the Image Stabilizer setting, after setting the preset.
● When using a dome housing, set the preset while the dome is installed.
● When changing settings for camera’s installation conditions, you need to renew
the settings of preset.
Tip
● You can set up to 20 presets.
● Changes in the preset settings are not applied to the viewer while it is connected.
● If you check “Not shown in Viewers” (→ P.2-19), you can prevent presets from
being used in VB-C60.
● Preset positions cannot be set in the digital zoom area.
● You can set multiple presets and save them at once using “Save Preset Settings”.