Canon VB-C60B - Manual (Page 31)

1-17
Detailed Settings
▼Camera Position Control
1 Restricted to Presets
Select whether or not to restrict the camera control to presets from “No Restriction” and “Preset
Only”. When “Preset Only” is selected, the camera control is restricted to preset angles only
for all users except the administrator.
▼Installation Conditions
1 Dome
Select whether or not to use a dome. When you use the camera with a dome housing, select “Used”.
2 LED Setting
Select whether or not to light the LED on camera’s head arm from “Turn On” and “Turn Off”.
Select “Turn OFF” when the LED light is not needed or it can interfere monitoring, for example,
when you use the camera with an optional indoor dome housing (VB-RD51S-C/S) or when
reflected LED lights may be gotten into the shooting frame.
3 Mount
Select the camera mount type. The factory default setting is Inverted.
Set the Camera Control and External Device Names (Camera)
Note
● Operation of the day/night switching function should be tested thoroughly before
using “Day/Night” in the “Auto” mode.
● When using “Day/Night” in the “Auto” mode, “AE Mode” should be set to “Auto” or
Flickerless” (
➞ P.3-25).
● When using the camera with IR light, “Day/Night” should be set to “Manual”. IR
light cannot be used in the “Auto” mode.
● While using “Day/Night” in the “Auto” mode, the IR cut filter may be inserted and
removed several times, at the time of switching day mode and night mode. In the
meanwhile, Pan, Tilt, Zoom and Manual focus do not operate.
Tip
● Even when “LED Setting” is set to “Turn off”, the LED will turn on once when the
camera is started.
● The image for the Inverted “Mount” type shows the conditions with the cover for a
ceiling mount (The ceiling mount cover is option).
12
12 1
12
12
2
12
12
3
12
12
1
12
12
2