Canon VB-C60B User Manual

Page 55

1-41

Detailed Settings

!6 SA AH Authentication Algorithm

Select the AH authentication algorithm from “HMAC_SHA1_96” and “HMAC_MD5_96”
according to the authentication algorithm supported by the destination device.

!7 SA AH Authentication Key (outbound)

Set the SA authentication key for outbound. Set a hexadecimal value that corresponds to
160bit if “HMAC_SHA1_96” is selected in 8 or 128bit if “HMAC_MD5_96”.

!8 SA AH SPI (outbound)

Set the SA SPI value for outbound. Set it in the range of 256 - 4294967295.

!9 SA AH Authentication Key (inbound)

Set the SA authentication key for inbound. Set a hexadecimal value that corresponds to 160bit
if “HMAC_SHA1_96” is selected in 8 or 128bit if “HMAC_MD5_96”.

@0 SA AH SPI (inbound)

Set the SA SPI value for inbound. Set it in the range of 256 - 4294967295. Since the setting
value is used as an ID number to identify SA, do not specify the same value as the SPI of
another AH.

Set IPsec (IPsec)

Note

● In order to operate VB-C60 using IPsec, you need to set communication destinations

and the network in advance. For more information on these settings, contact your

system administrator.

● If you change the setting of “IPSec”, the currently-used browser may become unable

to access the camera. Be sure to read the note in the “Setting Items That Require

a Reboot” page (

➞ P.1-43), in advance.