Camera control, Detailed settings – Canon VB-C60B User Manual
Page 29
1-15
Detailed Settings
Point of infinity
Note) The camera may be out of focus.
Day/Night setting
Day mode
Night mode
Dome
Infrared lamp
Wide end
Tele end
Wide end
Tele end
Auto
Not used
None
0.3m
1.5m
0.5m
1.8m
Used
None
2.1m
2.4m
Not used
Yes
0.5m
1.8m
Used
Yes
0.5m
2.4m
Fixed at infinity
None
Point of infinity
Yes
Set the Camera Control and External Device Names (Camera)
Tip
● The camera may have difficulty focusing automatically on subjects of the type
shown below.
Subjects with little or
no contrast (e.g. a
white wall)
Angled subjects
Highly reflective
subjects
Subjects that consist
entirely of oblique or
horizontal lines or stripes
Insubstantial
subjects such as
flames or smoke
Subjects seen
through glass
Quickly moving
subjects
Far and near subjects
in the same frame
Night views or
dark places
● The focusing range (approx) differs depend on the “Day/Night” and other settings
as shown below.
● It is recommended to set “Focus Mode” to “Fixed at infinity” to capture video of low-
contrast subjects, of which it is difficult to obtain correct focus, e.g. night scene.
▼Camera Control
1 Digital Zoom
Select whether or not to use the digital zoom from “Disable” or “Enable”.
* The higher the zoom factor is, the lower the image quality may be.
12
12
1
12
12
2