Rice Lake MA160 Sartorius Moisture Analyzer - Manual (Page 32)

32
System Settings (Setup Menu)
Operating Instructions Moisture Analyzer MA160
Under Decimal separator (also available when “PC spreadsheet format” has been
selected):
–
Decimal point (default setting): The number value is transmitted with a
decimal point to the PC program (example: 99 .963 g) .
– Decimal comma : The value is transmitted with a decimal comma to the PC
program (example: 99,963 g) .
Under Keyboard emulation (also available when “PC spreadsheet format” or
“PC text format” has been selected):
–
Universal (Num Lock on) (default setting): Data is sent as special keyboard
characters in ASCII format (ALT + number pad) .
Requirement: Numbers lock must be turned on on the PC keyboard .
– English (USA) : Data is sent according to a keyboard set to English (USA) .
Requirement: For PC applications, such as MS Excel, the keyboard must be set
to English (USA) .
You can find more information in Chapter “USB Interface” .
2) Connection to Sartorius Lab Printer via the Supplied Printer Cable
Under Device/Protocol :
t Select the desired setting for the connection to the printer .
– YDP30/YDP40 : The connected printer is detected automatically and the
connection is established .
– Off : The connection to the printer is deactivated .
3) Connection to a Serial Printer or Another External Serial Device via a 9-pin
Serial Interface (USB Mini-A to RS-232)
Under Device/Protocol :
t Select the desired setting for the connection to the device .
– Printer YDP20-0CE
– USB-RS232 SBI
– Off : The connection is deactivated .
Check the settings for Printer YDP20-0CE :
t Set the printer to the default setting: 1200 baud, 7 bits, odd parity,
1 stop bit, CTS/RTS handshake
Under RS-232 Configuration :
This option can be selected if under Device/Protocol the setting USB-RS232 SBI
has been selected .
t Select the desired setting for the RS-232 interface .
– Baudrate : 600 to 19,200 (default setting: 9600)
– Databits : 7 bits or 8 bits (default setting: 8 bits)
– Parity : Odd, even, or none (default setting: odd)
– Stopbits : 1 bit or 2 bits (default setting: 1 bit)
– Handshake : Software (XON, XOFF), hardware (CTS, RTS), or off
[default setting: hardware (CTS, RTS)]