Device information, Calibration/adjustment, Printout – Rice Lake MA160 Sartorius Moisture Analyzer User Manual

Page 28

System Settings (Setup Menu)

Operating Instructions Moisture Analyzer MA160

Device Information

The manufacturer, model, serial number and software version of the moisture
analyzer are displayed here .

Calibration/Adjustment

Calibration/Adjustment

MA performance test
Weighing system adjustment
Calibration report

The settings for calibration and adjustment of the moisture analyzer can be defined

here .

Under

MA performance test

Test functions for different temperature ranges are available here . You can only use
these functions with the ReproEasy pad (accessory) .

Under

Weighing system adjustment

Select the option of your choice .

–

CAL-Extern

: Carry out calibration with an external calibration weight

(see Chapter “Calibration and Adjustment”) .

–

Weighing only

: Use the weighing function to use the moisture analyzer

as a simple lab balance (see Chapter “Calibration and Adjustment”, section
“Weighing”) .

Under

Calibration report

Here you can access the most recent calibration reports for the MA performance
tests and weighing system adjustments . Up to 99 reports are saved per day .
Calibration reports older than 30 days are deleted .

Printout

You can configure the settings for printing and data output here . Some of
the settings depend on the configuration of the USB interface (see Chapter “USB
Interface” on page 31) .

Under

Printout measurement

Select the settings for printing out the results on the connected lab printer .

–

Printout measurement

: The printout can be activated and deactivated

during the measurement here .

–

Interim results

: If the printout is activated, you can also activate the

output of intermediate values during the measurement here .

–

Interval [sec]

: Enter the desired interval in seconds for the output of the

intermediate results .

Under

Printout and report format

Configure all settings for the output format .

–

Result only

: Only the result of the moisture analysis is output .

–

With GLP and method parameters

: The GLP data and parameters used for

the moisture analysis are also output .

–

User-defined

: Activate the “User-defined” menu item .

Under

User-defined

Select the data for output individually and confirm with

Device information

Manufacturer:

Sartorius

Model:

MA160-1

Serial number:

0034002458

Version BAC:

00-53-01.01 CN:1701

Version APC:

01-80-01.05 CN:0000

Version DOC:

07-40-03.00 CN:0000

Calibration report

MA performance test
Weighing system adjustment

Printout

Printout measurement
Printout and report format
User-defined