Rice Lake IQ plus 590-DC Installation Manual - Manual (Page 6)

2 IQ plus 590-DC Installation Manual
1.2 Front Panel Keypad
Figure 1-1 shows the IQ plus 590-DC front panel keys and the key functions assigned in normal mode.
The symbols shown above the keys in Figure 1-1 (representing up, down, enter, left, right) describe the key
functions assigned in setup mode. In setup mode, the keys are used to navigate through menus, select digits
within numeric values, and increment/decrement values. See Section 3.1.3 on page 12 for information about
using the front panel keys in setup mode.
Labels under the keys in Figure 1-1 describe the key functions used in piece count mode. See Section 6.0 on
page 29 for more information about counting operations.
Figure 1-1. Front Panel Key Functions in Normal Mode
T
4
9 0 8
5 2
7 6
3
CLEAR
DISPLAY
TARE
ZERO GROSS
NET
TARE UNITS PRINT
B/N Units
POWER
ENTER SAMPLE MODE PRINT
I / O
Switch between
primary and
secondary units
Send data to
serial port
Set gross weight
to zero
Switch between
gross, net, and
piece count mode
Acquire tare
NORMAL MODE KEY FUNCTIONS
Display current
tare weight
Power on/off
T