2 menu structures and parameter descriptions, En in section 3.2 – Rice Lake IQ plus 590-DC Installation Manual User Manual
Page 17
Configuration
13
Four front panel keys are used as directional keys to navigate through the menus in setup mode (see Figure 3-2).
The
UNITS
( ) and
( ) keys scroll left and right (horizontally) on the same menu level;
ZERO
( ) and
GROSS/NET
( ) move up and down (vertically) to different menu levels. The
TARE
key ( ) serves as an Enter
key for selecting parameter values within the menus. A label over each of these keys identifies the direction
provided by the key when navigating through the setup menus.
Figure 3-3. Setup Mode Menu Navigation
To select a parameter, press or to scroll left or right until the desired menu group appears on the display,
then press to move down to the submenu or parameter you want. When moving through the menu parameters,
the default or previously selected value appears first on the display.
To change a parameter value, scroll left or right to view the values for that parameter. When the desired value
appears on the display, press to select the value and move back up one level. To edit numeric values, use the
numeric keypad on the indicator front panel.
3.2
Menu Structures and Parameter Descriptions
The following sections provide graphic representations of the IQ plus 590-DC menu structures. In the actual
menu structure, the settings you choose under each parameter are arranged horizontally. To save page space,
menu choices are shown in vertical columns. The factory default setting appears at the top of each column.
Most menu diagrams are accompanied by a table that describes all parameters and parameter values associated
with that menu. Default parameter values are shown in bold type.
NOTE:
Some characters cannot be accurately represented on the 7-segment front panel LCD display. Section 8.4
on page 37 lists the 7-segment character set and the alphanumerics they represent.
1
st
Level
Parameter
Default value
2
nd
Level
Parameter
Value
Value
Value
1
st
Level
Parameter
2
nd
Level
Parameter
When moving through values below the first menu level, press
to return to the level
above. Press
or
to move to the next parameter on the level above.