Rice Lake IQ Plus 210 Digital Weight Indicator - Manual (Page 6)

2 IQ plus 2100 Installation Manual
1.2 Front Panel
Figure 1-1 shows the IQ plus 210 LED annunciators, buttons, and normal mode key functions.
Figure 1-1. IQ plus 210 Front Panel, Showing LED Annunciators and Normal Mode Key Functions
1.3 LED Annunciators
The IQ plus 210 display uses a set of seven LED
annunciators to provide additional information about
the value being displayed:
•
Neg
annunciator lights to show that the displayed
value is negative.
•
Zero
: Weight is within 0.25 graduations of zero.
This annunciator lights when the scale is zeroed.
•
Motion
: Scale in motion outside the specified
motion band. Zeroing and print operations can only
be done when the motion LED is off.
•
lb, kg, oz,
and
g
annunciators indicate the units
associated with the displayed value: lb=pounds,
kg=kilograms, oz=ounces, g=grams.
lb
and
oz
annunciators are both lit when the displayed weight
is in pounds and ounces.
1.4 Indicator Operations
Basic IQ plus 210 operations are summarized below.
Zero Scale
1. Remove material from the scale and wait for
the Motion LED to go out.
2. Press the ZERO button. The Zero annunciator
lights to indicate the scale is zeroed.
Change Display Units
Press the UNITS button to change the displayed units
between primary and alternate units. The LED
annunciators on the right side of the display show the
current displayed units. If more than one alternate unit
is configured, the display cycles through the alternate
units before returning to primary units; if no alternate
units are configured, the display does not change when
the button is pressed.
D I G I T A L W E I G H T I N D I C A T O R
ZERO
Set scale weight to zero
UNITS
Change displayed units
kg
g
lb
oz
ZERO UNITS
Zero
Motion
Neg