Rice Lake IQ Plus 210 Digital Weight Indicator - Manual (Page 15)

Configuration 11
3.1.3 Front Panel Configuration
The IQ plus 210 indicator can be configured using a series of menus accessed through the indicator front panel
when the indicator is in setup mode. Table 3-1 summarizes the functions of each of the main menus.
Figure 3-2. Front Panel Key Functions in Setup Mode
Menu Menu Function
CONFIG Configuration Configure grads, zero tracking, zero range, motion band, overload, and digital filtering
parameters.
FORMAT Format Set format of primary units, select alternate display units.
CALIBR Calibration Calibrate indicator. See Section 4.0 on page 20 for calibration procedures.
SERIAL Serial Configure serial port.
DIG IN Digital Input Assign digital input functions.
DEFLT Default Restore default configuration.
VERS Version Display installed software version number.
Table 3-1. IQ plus 210 Menu Summary
D I G I T A L W E I G H T I N D I C A T O R
ZERO/ENTER
Move down in menu or
enter parameter value and
return to menu level above
UNITS/RIGHT
Move right in menu /
next parameter value
kg
g
lb
oz
ZERO UNITS
Zero
Motion
Neg