Rice Lake IQ Plus 210 Digital Weight Indicator - Manual (Page 27)

EDP Commands 23
Command Description Values
GRADS Graduations 1–10 000
ZTRKBND Zero track band OFF, 0.5D, 1D, 3D
ZRANGE Zero range 1.9%, 100%
MOTBAND Motion band 1D, 2D, 3D, 5D, 10D, 20D, OFF
OVRLOAD Overload FS+2%, FS+1D, FS+9D, FS
FILTER Digital filtering 1, 2, 4, 8, 16, 4RT, 8RT, 16RT
Table 5-3. CONFIG EDP Commands
Command Description Values
PRI.DECPNT Primary units decimal position 8.88888, 88.8888, 888.888, 8888.88, 88888.8, 888888, 888880
(88 88.8 or 888 88 in LB/OZ display mode)
PRI.DSPDIV Primary units display divisions 1D, 2D, 5D
PRI.UNITS Primary units LB, KG, OZ, G, LB/OZ
ALT.LB
ALT.KG
ALT.OZ
ALT.G
ALT.LBOZ Enable alternate units ON, OFF
Table 5-4. FORMAT EDP Commands
Command Description Values
WZERO Zero calibration —
WVAL Test weight value test_weight_value
WSPAN Span calibration —
REZERO Rezero —
LC.CD Set deadload count value
LC.CW Set span count value
Table 5-5. CALIBR EDP Commands
Command Description Values
EDP.BAUD Serial port baud rate 1200, 2400, 4800, 9600
EDP.BITS Serial port data bits/parity 8NONE, 7EVEN, 7ODD
EDP.TERMIN Serial port termination character CR/LF, CR
EDP.ECHO Serial port echo command OFF, ON
PRNFREQ Print frequency DEMAND, AUTO1, AUTO2, STREAM
Table 5-6. SERIAL EDP Commands
Command Description Values
DIGIN1
DIGIN2 Digital input function OFF, ZERO, UNITS, PRINT
Table 5-7. DIG IN EDP Commands