Sleep, Auto-off, Serial output – Rice Lake Intercomp CS 200 - Users Manual User Manual
Page 7: Baud rate

CS200, Users
August, 2009
7
To adjust the sample rate: Access the options menu. Press ZERO until the
display reads “S rt
S rt
S rt
S rt”. Simultaneously press the ZERO and backlight keys and
release. Enter the sample rate. The display will momentarily display “SavE
SavE
SavE
SavE” and
return to normal mode.
Sleep
The sleep mode is designed to conserve battery life. The sleep mode time is
how long the scale's display will remain ON without any activity (a key being
pressed or a change in weight).
To adjust the sleep mode time: Access the options menu. Press ZERO until the
display reads “SLP
SLP
SLP
SLP”. Simultaneously press the ZERO and backlight keys and
release. Enter the sleep mode time (in minutes). To deactivate sleep, enter 0.
The maximum time is 180 minutes.
Auto-off
The auto off time is how long the scale will remain on without any activity (a key
being pressed or a change in weight).
To adjust the auto-off time: Access the options menu. Press ZERO until the
display reads “AOFF
AOFF
AOFF
AOFF”. Simultaneously press the ZERO and backlight keys and
release. Enter the auto-off time (in minutes). To deactivate auto-off, enter 0.
The maximum time is 180 minutes.
Serial output
This feature is only applicable if you have the serial output version of the CS200.
To turn on continuous serial output: Access the options menu. Press ZERO
until the display reads “SEr
SEr
SEr
SEr”. Simultaneously press the ZERO and backlight keys
and release. Enter a “1” to activate serial output or “0” to deactivate.
Baud Rate
This feature is only applicable if you have the serial output version of the CS200.
When using serial output (this includes the print function), the baud rate must
match the peripheral device you are using.
To set the baud rate: Access the options menu. Press ZERO until the display
reads “bAud
bAud
bAud
bAud”. Simultaneously press the ZERO and backlight keys and release.
The following baud rates can be entered: 300, 600, 1200, 2400, 4800, 9600.
Default baud rate is 9600.