Rice Lake Intercomp CS 200 - Users Manual - Manual (Page 5)

CS200, Users
August, 2009
5
Warning: Stay clear of suspended loads.
Warning: Do not lift loads higher than necessary.
Warning: Do not make alterations or modifications to the crane scale.
Warning: Ensure all portions of the human body are kept clear of all device involved
with the rigging during the lift.
Controls
On/Off
Press this button to turn the CS200 on. The unit tests itself; when these tests
have completed successfully, the system begins weighing. Press this button
again to turn the unit off.
NOTE: The scale will briefly display the firmware version when turning off.
ZERO
Tells the CS200 to display a zero weight. If you press ZERO with weight on the
pad, that weight becomes the zero condition for the scale. When this weight is
removed, a negative weight shows until the system is zeroed again.
NOTE: if this negative number is too large to fit on the display, the scale will
display “dIS
dIS dIS dIS” until you press ZERO.
The scale contains a feature called Auto Zero Tracking (AZT), which corrects for
slight zero changes during normal operation. If small weights are added slowly,
the CS200 could zero them off.
Backlight
Press this key to toggle the backlight on and off.