Rice Lake Equipoise Series, Rice Lake Weighing Systems - Manual (Page 11)

Parts Counting 7
3.7 Parts Counting
1. Press to enter the parts counting mode.
2. Select the sample count by pressing until the desired count is shown.
Place selected quantity of product on the balance.
Table 3-2. Display/Count
3. Press to confirm.
4. Add more items. The weight display will show the total number of parts.
5. Press to exit counting mode.
The balance retains the sample rate until exiting the counting mode.
3.7.1 Parts Counting With A Container
1. Place a container on the platform.
2. Press to zero the balance.
3. Select the parts quantity as shown in Table 3-2 .
4. Place the specified number of parts in the container.
5. Press to confirm. The display will show ---- then the quantity.
6. Add product on the platform. The display will update the parts quantity
automatically to total number of parts in the container.
7. Press to exit counting mode.
Display Count number
sp 10 pcs For 10 pieces
sP 20 pcs For 20 pieces
sP 50 pcs For 50 pieces
sP 100 pcs For 100 pieces
sP 200 pcs For 200 pieces
Sample
Sample
Mode
Mode
Zero
Sample
Sample
Note
Tare
Zero
Sample
Sample