Rice Lake Equipoise Series, Rice Lake Weighing Systems - Manual (Page 10)

6 Equipoise Series Technical Manual
3.5 Weighing Units
1. Press in the weighing mode to change the unit of measure:
Table 3-1. Weight Unit List
Units can be set to On/Off in the parameters settings. See “Set Weighing
Unit” on page 10. If unit is set to off it will not show when pressing the
MODE key.
3.6 Percent Weighing
The balance can set a base weight to be shown as 100%. Then when other weights
are placed on the balance, it will be displayed as a percentage of the original base
weight.
For example:
1. Place base weight on the balance.
2. Press , display will show 100.00%.
3. Remove the weight and wait for display to return to zero.
4. Place the weight you want to compare to the base weight on the platform.
The display show what percent the current weight is of the base weight.
5. The weighing may be amended on the basis of greater numbers of samples,
improves the accuracy of percentage of large quantities.
Unit Mark Unit Name Conversion (g)
g gram
ct net carat 0.2g
Lb pound 453.59237g
OZ ounce 28.349523125g
d dram 1.7718451g
GN grain 0.06479891g
OZt troy ounce 31.1034768g
dWt penny weight 1.55517384g
MM momme 3.749996g
TLT tael twn 37.49995g
TLh tael chn 37.799375g
TLJ troy tael 37.4290018g
t tola 11.6638039g
bt bangladeshi tola 1bt=11.6638039g
1bt=16Ana=96Roti
N newton 1N=101.916g
Mode
Mode
Note
Percent