Rice Lake CW-90X Over/Under/Washdown Checkweigher - Ethernet - Manual (Page 22)

18 Ethernet TCP/IP Card Installation Manual
17. The screen automatically goes to end the screen which gives the choice to Save and Exit ( 9 ) and is shown
below. By selecting that choice, and pressing Enter , the WLAN parameters are saved and the screen
becomes grayed out as is shown below.
Figure 4-18. Save and Exit Screen
Once all of the data is saved, you must switch the jumpers back to the OFF position (Figure 5) to exit out of the
configuration mode.
Now you can access and view all wireless data on the PC.
4.7 Enclosure Reassembly
Once cabling is complete, position the backplate over the enclosure and reinstall the backplate screws. Use the
torque pattern shown in the indicator’s manual to prevent distorting the backplate gasket.
4.8 WiPort Wireless Specifications
Category Description
Network Standards IEEE 802.11b; IEEE 802.11g
Frequency Range 2.412 - 2.484 GHz
Antenna Connector 1, no diversity supported
Data Rates 1, 2, 5.5, 11Mbps (802.11b)
6, 9, 12, 18, 24, 36, 48, 54Mbps (802.11g)
Radio Number of Selectable
Channels Up to 14 channels. Profiles available will include USA, France, Japan, Spain,
Canada and "other" (multiple countries).
Modulations OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
Antenna Connector 1
Security WEP 64/128, WPA-PSK, TKIP, AES end-to-end encryption
Maximum Receive Level -10 dBm (with PER < 8%)
Receiver Sensitivity -72 dBm for 54Mbps
-87 dBm for 11Mbps
-89 dBm for 5.5Mbps
-90 dBm for 2.0Mbps
-92 dBm for 1.0Mbps
WLAN Power and Link LED Current Max: 4 mA
Table 4-3. WiPort Wireless Specifications