Rice Lake AutoLift HE Low-Profile Lift - Manual (Page 6)

2 RoughDeck HE AutoLift
1.2 Model Designations
The model identification plate is located on the bottom of the scale deck. Include both model number and serial
number when ordering replacement parts.
The AutoLift is a RoughDeck HE with pneumatic lifting devices to allow you to raise the scale for easy cleaning.
The HE is a washdown stainless steel, NTEP-certified model with hermetically-sealed load cells.
1.3 Operating Requirements
Electrical Grounding
For systems where the scale is connected to a 120 VAC circuit, the instrument must be directly connected to an earth
ground with a ground interface cable of no more than 3
 resistance throughout its length.
Load Cell Excitation
Rated Excitation: 10 VDC
Maximum Excitation: 15 VDC
Grade Level Requirements
The supporting surface for the scale feet must be level within
1
/
4
" of horizontal.
Safe Static Overloading Capacity
Maximum: 150% of scale capacity
Nominal Scale Height
2K–10K lb (1000–5000 Kg) models: 3.5" (89 mm)