3 modifying the setup password, 4 enabling/disabling additional data fields – Rice Lake 920i FlexWeigh Systems - 101 User Manual
Page 13
Modifying the Setup Password
9
3.3
Modifying the Setup Password
Use the following steps to modify the setup password.
1. From the
Main Setup Menu Screen
, press the
Setup Password
softkey.
2. The system prompts,
Enter New Password
.
Figure 3-5. Enter New Password
3. Enter the new password and press the
enter
key.
4. The system prompts
Re-enter password
to verify.
5. Re-enter the password and press the
enter
key again. The system performs one of the following actions.
• If the passwords match, the system displays
Password Changed.
• If the passwords do not match, the system displays
Passwords Did Not Match
and exits the operation.
3.4
Enabling/Disabling Additional Data Fields
Use the following steps to enable or disable additional data fields.
1. From the main setup menu screen, press the
Setup Password
softkey (shown in Figure 3-2).
A setup password is not required if it has never been set or if you are already in Setup mode.
2. Press the
ID #1
or
ID #2
softkey. The system displays
Enable ID #1
or
ID #2
while displaying
Yes
or
No
softkeys or
Disable ID #1 or #2
.
Figure 3-6. Enabling IDs
3. The operator does one of the following.
Press the
Yes
softkey, the system prompts
Enter Extra Data #1 Name
. Enter the name and press the
enter
key
on the 920i. A new data field appears on the main display and as a softkey so that the operator can change
it. To enter alpha characters, press the
Up
navigation key to access a pop up alphabet.
Press the
Yes
softkey and this returns the operator back to Step 1.
04/27/2011
02:15PM
SCALE #1
Cancel
End
Enter New Password:
136.8
SCALE #1
Gross
Lb
Home
Program: Express 101 (V 1.00)
ID #1 (disabled)
Start
O Zero Tol
ID #2 (disabled)
Resume
O Fill Copt
Dual Speed (enabled)
Reset
O Slow Fill
Auto Tare (enabled)
Stop
O Fast Fill
Auto Print (disabled)
Delay After Discharge (sec) :30
Note
04/27/2011
02:15PM
SCALE #1
No
Enable ID #1:
=>
136.8
SCALE #1
Gross
Lb
SETUP MENU
Yes
Program: Express 101 (V 1.00)
ID #1 (disabled)
Start
O Zero Tol
ID #2 (disabled)
Resume
O Fill Copt
Dual Speed (enabled)
Reset
O Slow Fill
Auto Tare (enabled)
Stop
O Fast Fill
Auto Print (disabled)
Delay After Discharge (sec) :30