Rice Lake 920i Bulkweigher 107 - 108 - 109 - Manual (Page 6)

2 920i Flexweigh Systems Bulkweigher
1.2 Overview
Three Flexweigh systems are supported by custom software.
• 920i Flexweigh Systems 107 is a shipping mode bulkweigher, designed for basic shipping mode bulkweighing
applications. In shipping mode, a scale is loaded and discharged repetitively until the accumulated total meets
or exceeds the preset target.
• 920i Flexweigh Systems 108 is designed for basic receiving mode bulkweighing applications. In receiving
mode, a scale is loaded and discharged repetitively until there is no more product to receive.
• 920i Flexweigh Systems 109 allows the user to select between shipping or receiving modes of operation.
1.2.1 Standard Features
All three Flexweigh systems come with the following standard features:
• Fill and discharge sequence controls
• Fill and discharge gate monitoring
• Printer available checking
• Weigh and surge hopper overfill monitoring
• Accumulated weight streaming
Note
The iRite program and source code that make up the 920i Flexweigh Systems Bulkweigher software are the
property of the manufacturer. Modifications to this program and equipment must be performed by Rice Lake
Weighing Systems.
For more information on the iRite compiler utility program, refer to the 920i Installation and Operation Manual (PN 67887),
which is included with this product.
1.3 Button Functions
Table 1-1. Front Panel Button Functions
Front Panel Button Function
E-Stop Stops the filling process and removes power from the relays. It also puts the process into a paused state.
Start/Resume Starts the filling process from a paused state. Requires that the E-Stop is in a run position.
End Cycle Initiates completion of final draft.
Ship/Recv Selects between shipping mode or receiving mode operation on the Flexweigh 109 model.