Rice Lake 920i Bulkweigher 107 - 108 - 109 - Manual (Page 16)

12 920i Flexweigh Systems Bulkweigher
3.1.3 Modifying the Setup Password
Use the following steps to modify the setup password.
1. From the main setup menu screen, press the Setup Password softkey.
2. The system prompts, Enter New Passwor
04/17/2012 02:15PM SCALE #1
Cancel End
Enter New Password:
3
SCALE #1
Gross
Lb
Home
ID #1: (Disabled)
ID #2: (Disabled)
Slow Cycle Time (sec): 45.00
Delay After Fill (sec): 3.0
Delay After Discharge (sec): 3.0
Discharge Delay (sec): 3.0
Subtotal Print: 3
=>
Program: Express xxxx, PN
Setup Menu
d as shown in Figure 5-3.
Figure 3-3. Enter New Password
3. Enter the new password and press enter .
4. The system prompts Re-enter password to Verify .
5. Re-enter the password and press enter again.
6. The system performs one of the following actions:
• If the passwords match, the system displays Password Changed.
• If the passwords do not match, the system displays Error: Passwords Don’t Match and exits the sequence
of operation.
7. When the system password criteria is satisfied, press enter and the following display is shown.
04/17/2012 02:16 PM SCALE #1
ID#1 More =>
0
SCALE #1
Gross
Lb
SETUP MENU
Time/Date
Setup
Password
ID#2
Program: Express
ID #1 (Disabled)
ID #2 (Disabled)
Slow Cycle Time (sec): 45.0
Delay After Fill (sec): 3.0
Delay After Discharge (sec): 30
Discharge Delay (sec): 3.0
Subtotal Print: 3
Figure 3-4. Setup Menu Main Screen