Rice Lake CW-90/90X - 720i - 820i - iQUBE2 - LaserLT WLAN - Manual (Page 7)

Note
Table 2. Topology Choices and Descriptions
Topology Choice Description
0=Infrastructure Communicating to an access point for a large network (i.e., indicator to company/office network)
1=AdHoc Point-to-point connection (i.e., computer to indicator)
Note
WLAN Installation Instructions 7
The present setting for each parameter is shown in parentheses. To accept this value, press Enter. Enter a new
value and press Enter to change the setting.
Steps 9 to 14 show an example of an AdHoc configuration with no security. Your configuration may vary.
9. The next menu choice is Network Name (SSID) as shown in Figure 11. Enter your desired wireless network
name and press
Enter
. This identifies the network the wireless option will connect to.
Figure 11 “Network Name” Screen
10. Enter your wireless network channel and press
Enter
.
Figure 12 “Wireless Network Channel” Screen