beautypg.com

6 wlan card configuration – Rice Lake Ethernet TCP/IP User Manual

Page 17

background image

Ethernet TCP/IP Card Installation Manual - WLAN Installation and Configuration

13

4.6

WLAN Card Configuration

1. Select the HyperTerminal program on the PC.

2. Enter a name and choose an icon for the connection, then click OK.

Figure 4-5. HyperTerminal connection description screen

3. Select a Connect To option. Select the comm port you have connected your serial cable to and click OK.

Figure 4-6. Connect To screen

4. Comm port properties must be set as shown in the following screen.

This manual is related to the following products:
See also other documents in the category Rice Lake Scales: