Rice Lake Z6 Single-Ended Beam, SS Welded-seal, IP67, OIML C3 - Manual (Page 33)

Weigh Modules: Double-Ended Beam 29
Typical Application
Figure 15-4. RL1600 Modules on Low-Profile Tank
15.3 SURVIVOR ® 2100HE Modules
These medium- to heavy-capacity modules are available in two
sizes in capacities ranging from 20,000-100,000lb. The
SURVIVOR 2100HE uses a double-ended shear beam load cell
and is ideally suited for tanks, hoppers, and reactors that are
subject to harsh, hostile environments. This module provides
superior corrosion, moisture ingress, and mechanical protection.
In the majority of applications, the assemblies are self-checking
and held captive with no need for check or stay rods. The load
cells are each waterproof guaranteed and NTEP certified by
utilizing the RL75060S stainless steel load cell.
Allowable Movement
Figure 15-5 illustrates the 2100HE module’s capability to
handle movement.
Figure 15-5. SURVIVOR 2100HE
Construction and Features
1. IP67 environmental rating to protect against
moisture damage.
2. Design transmits the load with a sliding pin on the
load bearing groove of the cell to allow for thermal
expansion/contraction with little friction.
3. Tolerates eccentric loads and side loads of up to
100% of capacity.
4. PTFE jacketed cable is standard for maximum
chemical resistance.
5. All modules come standard in stainless steel.
6. Internal lift-off protection and checking eliminates
extraneous hardware.
Typical Application
Typical applications for the SURVIVOR 2100HE include
heavy-capacity tanks, blenders, reactors, and bulk inventory
management.
Figure 15-6. SURVIVOR 2100HE in Heavy-Capacity
Application