QOMO KidzFlow! Manual - Manual (Page 6)

User Manual for KidzFlow! Software
© Copyright 2012 QOMO HiteVision, LLC. All Rights Reserved 6
Figure
1- 4 Type of Installation Dialog Box
4. A Select Component Interface box, as shown in Figure 1- 5 Select Component Interface
gives you the option to select which drivers you will need for your white board. All three
drivers are selected by default, but for example, if you are only going to use an EM board,
you can uncheck the boxes for the IR and AR drivers. Click the Next button to continue
the installation.
Figure 1- 5 Select Component Interface
5. The Prepare for Installation screen summarizes the settings that you selected for
installation, as shown in Figure 1- 6 Prepare for Installation. Click the Install button to
launch the installation process.