QOMO QRF900 User Manual User Manual

Page 116

www.qomo.com

116

In the item “Option Sum:” enter the total number of choices for this question and in the item

“Answers:” enter the correct answer for the question.

4. Use the Left Key

or Right Key

to select the Option Sum number and then use the

Down Key

to go to the correct answer selection.

5. Use the Left Key

or Right Key

to select the correct answer. After all the selection,

press “OK” Left Soft Key

to send the selection. The quiz will start automatically once the

information is successfully sent and received.

3.2.2.4.5 Instructor keypad in sleep mode:

In order to extend the life of the battery, a sleep mode has been implemented.

To use the sleep mode settings for the instructor keypad follow these steps:

1. Under the main me

nu, select item “4.Setting” to enter into the Hardware submenu.

Under the Hardware submenu, select “3.ScreenSaver” submenu in order to set the

duration time before going to the sleep mode.

3. Press the Up

/Down Key

to adjust and select time.

4. Press the Menu/ok Key

to confirm the setting.

Note: If the clicker stays without any interaction for a period of time that set in Screen Saver, the
keypad will enter into a sleep mode which will shut down the screen’s display. The user can press
any key to wake up the keypad and return to the previous display.

3.2.2.4.6 Instructor keypad factory settings:

WARNING: Using this function will clear all user data stored, including all the exam question
contents in the instructor keypad. It is NOT recoverable.

Sometimes it is convenient to clear all data stored in the keypad. This can be done by simply
restoring the factory settings. This is especially useful when you want to trade in your keypad.