ProgressiveRC 308Duo iCharger - Manual (Page 33)

308DUO V1.6.0
Synchronous Balance Charger/Discharger
- 33 -
 Pulse Measurement
Select SYSTEM MENU→Extra Function→Pulse Test to enter the pulse test interface, only J2 port supports the input
signal of Pulse Measurement.
 USB & SD Card Use
308DUO is the HID device of USB, supported by windows system directly, dispense with installing additional drivers.
The USB icon will light up on the lower right corner of the screen when the 308DUO connects with computer normally.
The SD icon will light up on the lower right corner of the screen when the SD card is inserted. If 308DUO connects with
the USB without running a program, the new added U disk can be found on the "My Computer” of the PC, and can
operate the file. Log files are stored in the X: \ Junsi \ iC308DUO \Log folder and config. files are stored in the
X:\Junsi\iC308DUO\System folder.
Note: 1. The file system of SD card must be FAT or FAT32.
2. Data in SD card needs to be backed up in case it is lost.
 Warranty & Service
 The product from the date of purchase enjoys free repair service within one year under normal conditions of use.
 Over the warranty, if replacement parts are needed the appropriate charge for components and repair will apply.
 During the warranty period, any of the following circumstances will not enjoy free repairs:
1) Failure to use in accordance with the requirements of the user manual.
2) Failure or damage caused by the unauthorized user dismantling, appending or modifying the charger.
3) Failure or damage due to natural disasters, bruises, collisions and incorrect supply voltages.