18_shelf – Oldcastle BuildingEnvelope Solar Shelf User Manual

Page 18






S U N C O N T R O L - I N S T A L L A T I O N M A N U A L

SOLAR SHELF

™

Insert panel into top and bottom

of wall mount. Tap lightly with

dead-blow hammer to ensure

panel is fully engaged.

FIGURE 21

Locate panel joint at

centerline of verticals

1/4"

4.7) Install .090" thick aluminum panels into upper and lower receivers. Lightly tap on edge of panel to

secure into track. Place wood block on outer edge of panel and tap into place using dead-blow

hammer. See FIGURE 21. Note: Panels should be cut shelf depth minus 1 7/8" for SS-124 & SS-125,

and shelf depth minus 4 5/8" for SS-119 & SS-123.