Oldcastle BuildingEnvelope Solar Shelf - Manual (Page 11)

11 


S U N C O N T R O L - I N S T A L L A T I O N M A N U A L
FS-20
(#10 X 1/2" S.S.
button socket head)
(4) per louver
FIGURE 10
FIGURE 11
Outriggers
3.2 Assembly
17) Attach outriggers to louvers using FS-20 (#10 x 1/2" stainless steel button socket head).
Quantity of fasteners will vary based on sunshade depth. See FIGURE 10.
18) Attach sunshades to anchors using (4) four 3/18"-16 x 1" stainless steel head head bolts.
See FIGURE 11. (Size and quantity of bolts may vary based on project requirements, consult
Attach outrigger to anchor using
(4) 3/8” stainless steel bolts, washers
and lock nuts. Bolt size matches load
be verified by an Engineer.
Reliance anchors. All connections must
capacity of standard CW-250 and
engineer for specific job applications.)
SOLAR ECLIPSE
Sunshade Assembly
™