Mercedes-Benz CL-Class 2003 COMAND Manual - Manual (Page 206)

198
Info Services/System settings
System settings
1 Changes by pressing Ä
2 Changes by pressing Ä and light
sensor in the roof control unit
P Setting active
Q Setting not active
If the settings menu ( ୴ page 188) is dis-
played
̈ Turn the right-hand rotary/push-button
v to highlight “Display (day/night)...”
and press to confirm.
The “Display (Day/Night)” menu will
appear. The setting 2 is active, when
calling up the menu for the first time.
̈ Turn the right-hand rotary/push-button
v to highlight the desired setting and
press to confirm.
The desired setting is active P.
Setting 2 has been selected
If the light sensor recognizes darkness or
twilight, the screen will change to night
display.
Changing the display
̈ Press Ä to access the following dis-
plays in succession.
ț Day display
ț Night display
ț Screen off
ț and the Day display again
Setting the display dimming charac-
teristics (day and night display)
P82.85-9528-31US
SYS Change display mode
Display Button
Display Button and
light sensor
1
2
Day/Night setting via