Mercedes-Benz CL-Class 2003 COMAND Manual - Manual (Page 187)

179
Navigation
Settings
̄ Settings
COMAND normally determines the vehicle
location automatically with the GPS. In ex-
ceptional cases, this may not be possible.
You can then enter the current vehicle lo-
cation manually in connection with an in-
tersection.
̈ Turn the right-hand rotary/push-button
v to highlight “Settings” in the main
destination input menu and press to
confirm.
̈ Turn the right-hand rotary/push-button
v to highlight “Location...” and press
to confirm.
The input menu to enter the city will ap-
pear.
̈ Enter the city/suburb and then the
street and select the required entries
from the corresponding list. See ente-
ring destination address (
୴ page 123).
After you have selected the street, you will
see a prompt for the intersection.
̈ Turn the right-hand rotary/push-button
v to highlight the appropriate cross
street and press to confirm.
The input menu “Location/Intersec-
tion” will appear.
Location is ahead or behind an intersection
̈ Turn the right-hand rotary/push-button
v to the right (location is ahead) or to
the left (location is behind) and press to
confirm.
The message “Chosen location accep-
ted” will appear.
̈ Press the right-hand rotary/push-
button
v to confirm.
Entering the vehicle location
P82.85-9496-31US
NAVI Location/Intersect.
Intersection:
TIMES SQUARE PLZ
W42 ND ST
appr.
50 yd ahead