Mercedes-Benz M-Class 2007 Owners Manual - Manual (Page 289)

288
Controls in detail
Loading
Use of the partition net is a particularly im-
portant safety factor when the vehicle is
loaded higher than the top of the seat
backrests with smaller objects. For your
safety, always use the partition net when
transporting cargo.
The partition net can be installed in two
locations:
1 Holder in B-pillar
2 Holder in C-pillar
ț Without the cargo compartment ex-
panded (
୴ page 284), use holders
above C-pillars 2 and the cargo
tie-down rings in the cargo compart-
ment (
୴ page 283).
ț With the cargo compartment expanded
(
୴ page 284), use holders above
B-pillars 1 and the cargo tie-down
rings behind the front seats
(
୴ page 283).
̈ Open the zipper on the partition net
package.
̈ Roll out the partition net.
̈ Unfold the partition net.
The partition net bars must audibly
engage.
Installing the partition net
Partition net bar hung up behind the C-pillar
1 Holder
2 Partition net bar
̈ Hang partition net bar 2 on holder 1
as indicated by the arrow.
̈ Push partition net bar 2 forward into
holder 1 in direction of arrow.