Mercedes-Benz M-Class 2007 Owners Manual - Manual (Page 235)

234
Controls in detail
3-zone automatic climate control*
Reactivating
̈ Press button > ( ୴ page 222).
The indicator lamp on the button
comes on.
In display e ( ୴ page 222), you will see
the > symbol followed by ON and
MODE . The MODE display is cleared and
the indicator lamp on button >
goes out after approximately
3 seconds.
The rear automatic climate control
switches on.
Setting the temperature
̈ Press button > ( ୴ page 222).
The indicator lamp on the button
comes on.
In display e ( ୴ page 222), you will see
the > symbol followed by MODE .
̈ Set the desired temperature for the
rear passenger compartment using
temperature control
3 ( ୴ page 233).
After approximately 3 seconds after
the last adjustment, the display switch-
es back to its standard display and the
indicator lamp on button
> goes
out.
Adjusting air distribution
Use the air distribution controls 5 or 6
to adjust the air distribution for the rear
passenger compartment.
The symbols on the controls represent the
following functions:
Adjusting manually
̈ Press the desired air distribution con-
trol.
The indicator lamp on button U
goes out.
i You can also press the > button once
more to switch back to the standard display.
Symbol Function
Z Directs air to the center air
vents
Y Directs air to the footwells and
the side air vents