Mercedes-Benz M-Class 2007 Owners Manual - Manual (Page 165)

164
Controls in detail
Control system
Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display
ț when the SmartKey in the starter
switch is turned to position 0 or
removed from the starter switch.
or
ț when you turn off the engine by
pressing the KEYLESS-GO* start/stop
button (
୴ page 67) in the starter
switch once and open the driver’s door
(this puts the starter switch in
position 0, same as with the SmartKey
removed from the starter switch)
Settings menu
In the Settings menu there are two
functions:
ț The function Reset to factory
settings? , with which you can reset all
the settings to the original factory
settings.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
̈ Press button è or ÿ repeatedly
until the Settings menu appears in the
multifunction display.
The following settings and submenus are
available in the
Settings menu:
i The vehicle status message memory will be
cleared when you turn the SmartKey in the start-
er switch to position 1 or 2, or when you press
the KEYLESS-GO* start/stop button once or
twice without depressing the brake pedal. You
will then only see high priority messages in the
multifunction display (
୴ page 428).
Function Page
Resetting all settings 165
Submenus in the settings menu 165
Instrument cluster submenu 167
Time/date submenu 169
Lighting submenu 171
Vehicle submenu 174
Comfort submenu* 177