Mercedes-Benz C-Class 2009 COMAND Manual - Manual (Page 75)

Destination Input
73
Entering Destination via the Map
i In some countries, entering destinations
via the map is not possible at vehicle
speeds above apprx. 3 mph. The function
becomes available again as soon as the
speed falls below apprx. 2 mph.
Using the destination entry via the map,
you can also enter a destination that lies
within the digital map but whose address
data is not included in the digital map.
Opening the Map
X If at least a city has been entered, select
Map in the Enter Destination menu
(
Y page 62).
or
X If necessary, display the menu system in
the map display (
Y page 54).
X Select Destination £ Using Map.
In both cases, the map together with
crosshairs appears.
1 Current vehicle location
2 Crosshairs
3 Information on crosshairs position
4 Set map scale
i The display 3 depends on the settings
selected in “Information On
Map” (
Y page 60). It may display the
current road if corresponding data is
available in the digital map. Or it displays
the geo-coordinates position of the
crosshairs if Geo-coordinates display
is activated and if there is adequate GPS
reception.
Moving the Map and Selecting a
Destination
X To move the map: Slide q m r , o m p or
w m x .
X To set the map scale: Rotate y m z .
Rotating clockwise makes the map smaller,
rotating counterclockwise enlarges it.
X To select a destination: Press n once or
repeatedly until you get a list of
destinations if available.
X To select a destination: Rotate y m z or
slide q m r .
X Press n.
If the destination is within the digital map,
COMAND tries to find the destination on
the map.
Navigation
Z