Mercedes-Benz R-Class 2010 Owners Manual - Manual (Page 139)

Vehicle submenu
Access the Vehicle submenu via the
Settings menu. Use the Vehicle submenu
to set the automatic central locking.
Switching automatic central locking on or
off
Use this function to switch the automatic
central locking on or off. With the automatic
central locking activated, the vehicle is
locked centrally at a vehicle speed of
approximately 9 mph (15 km/h).
X Press button V or U repeatedly until
the
Settings menu appears in the
multifunction display.
X Press button &.
X Move the selection marker with button
W or X to the Vehicle submenu.
X Press button & or * repeatedly until
the message
Automatic Door Locking
appears in the multifunction display.
The selection marker is on the current
setting.
X Press button W or X to switch the
automatic central locking
On or Off.
Comfort submenu
Access the Comfort submenu via the
Settings menu.
The following functions are available:
R Activating easy-entry/exit feature
(
Y page 137)
R
Activating/deactivating the seat belt
adjustment feature (
Y page 138)
R
Switching fold-in function for exterior rear
view mirrors on or off (
Y page 138)
Activating easy-entry/exit feature
Use this function to activate and deactivate
the easy-entry/exit feature (
Y page 92).
G Warning!
You must make sure no one can become
trapped or injured by the moving steering
wheel when the easy-entry/exit feature is
activated.
To stop steering wheel movement do one of
the following:
R Move steering wheel adjustment stalk.
R Press one of the memory position buttons.
R Press memory button M.
Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
X Press button V or U repeatedly until
the
Settings menu appears in the
multifunction display.
X Press button &.
X Move the selection marker with button
W or X to the Comfort submenu.
X Press button & or * repeatedly until
the message
Easy-entry Function
appears in the multifunction display.
The selection marker is on the current
setting.
Control system
137
Controls in detail
251_AKB; 4; 52, en-US
d2ureepe,
Version: 2.11.8.1
2009-03-23T09:22:52+01:00 - Seite 137
Z