Kontron KISS 4U Short KTQ67Flex - Manual (Page 30)

8. Assembly, Disassembly KISS 4U Short V2 – User's Guide (Version 1.01)
3. Pull the cover out a little bit (Fig. 26) to release the cover centering and fixing latches (Fig. 22, pos.3 and pos. 4) from
the retaining bracket of the chassis (see Fig. 6, pos. 5).
Fig. 26: Pull out the cover centering and fixing brackets from the retaining bracket of the chassis.
4. Lift the cover up (on the rear edge) and remove it (Fig. 27).
Fig. 27: Removing the cover
The card hold down brackets and a retaining bracket (Fig. 6, pos. 13 and Fig. 28) and a mounting bracket (Fig. 6, pos 7)
secure the expansion cards to the corresponding expansion slots.
3
2
1
1 Threaded holes for the externally accessible
fastening screws (Fig. 21, pos. 4)
2 Holes for the internal bolts (Fig. 21, Pos. 5)
3 Notches for the fastening screws that secure the
card hold down brackets to the internal
mounting bracket (Fig. 6, pos 7)
Fig. 28: Card hold down bracket for long expansion cards
28 www.kontron.com