Kontron KISS 4U Short KTQ67Flex - Manual (Page 14)

7. Product Description KISS 4U Short V2 – User's Guide (Version 1.01)
The power button of the KISS 4U Short V2 platform is located on the front side behind the front access panel. The LED
indicators are located on the front side and consist of a “power LED” and a “hard disk activity LED”.
Two system fans are installed at the front side of the unit. These are attached to the system by means of a fan slide-in
module. The fan slide-in module simplifies the installation and removal of these components, even during operation.
The washable filter mat, which protects your system against dust and dirt, is located on the front side of the system. This
filter mat can be replaced during operation.
On request, the KISS 4UShort V2 platform can optionally be equipped with either an AC wide range, a +24VDC or a -48VDC
power supply unit.
The type label is attached to the right side of the device.
The system can be ordered with frontal IP52 Protection Class.
The KISS 4U Short V2 platform may be operated in horizontal position only.
When powering on the KISS 4U Short V2 platform, make sure that the air intake and exhaust openings
are not obstructed by objects.
The frontal IP52 protection class for the KISS 4U Short V2 platform is ensured only with an additional
inserted steel mesh guard, and with closed front access panel.
12 www.kontron.com