Interfaces on the rear side – Kontron KISS 4U Short KTQ67Flex User Manual
Page 22
7. Product Description
KISS 4U Short V2 – User's Guide (Version 1.01)
Legend for Fig. 12 and Fig. 13:
1 AC power supply unit (PSU)
2 Power supply fan
3 “On/Off” switch of the PSU
(it does not
disconnect the system from the mains power
source)
4 AC input connector
5 Interfaces of the or motherboard
6 Free expansion card slots
7 Air exhaust openings
8 Rear side of the cover with captive knurled screws
9 Grounding stud
10 Optional serial interface (RS232) routed to the rear panel
11 Cut-outs for optional (customer-specific) interfaces routed to
the rear (9-pin D-SUB type)
7.2.1. Interfaces on the Rear Side
The positioning and number of the KISS 4U Short V2 platform interfaces may vary depending on the system
configuration.
Information and technical data can be found in the corresponding board manual of the installed
motherboard.
You can download the relevant board manual for your system from our web site at
selecting the product name.
7.2.1.1.
External Interfaces of the KTQ45/Flex Motherboard
A detailed ports description can be found in the manual of the installed motherboard. You can download
the corresponding manual from our web site
7
6
2
1
3
5
4
Fig. 14: External ports of the KTQ45/Flex motherboard
1 PS/2 mouse port (green)
2 Serial port (RS232)
3 2x Ethernet ports (RJ45),
(10/100/1000 Mbps)
4 Audio connectors (6.1)
5 6x USB(2.0) ports
6 VGA port
7 PS/2 keyboard port (purple)
20
www.kontron.com