Kontron AM4204 User Manual

Page 38

www.kontron.com

Detailed description of these options:

• -h | --help

This option shows a list of possible settings.

• -t | --status

This option shows the present configuration stored in NV ram of the MMC. This setting will take affect

after invoking a “Chassis Control Power cycle” command or after a complete hotswap cycle with remove
and reinsertion of the module.

• -I | --interface

This option checks if the setting is possible for this board. To set this setting the [–s|--set]

options has to be appended.

• -p | --pcie

This option checks if the setting is possible for this board. To set this setting the [–s|--set]
options has to be appended.

• -k | --clock

This option checks if the setting is possible for this board. To set this setting the [-s|--set]
options has to be appended

• -s | --set

This option set the configuration in the MMCs NV ram, updates the FRU data multirecord and performs a
MMC reset (IPMI Cold Reset).

• -c | --cycle

This option send the IPMI command “Chassis control Power cycle” to the MMC to perform a payload power

cycle. During the power cycle the configuration will be enabled.

This option is allowed without any other options or when a valid PCIe or Interface setting is configured
and activated with the [–s|--set] option.