Kontron AM4204 User Manual
Page 35
20
www.kontron.com
• -P
default: admin
[root@router01 ipmitool-1.8.9]#
ipmitool -I lanplus -H 10.0.1.145 -U admin -P admin mc info
Device ID : 6
Device Revision : 0
Firmware Revision : 5.24
IPMI Version : 1.5
Manufacturer ID : 15000
Manufacturer Name : Kontron
Product ID : 5516 (0x158c)
Device Available : yes
Provides Device SDRs : yes
Additional Device Support :
Sensor Device
FRU Inventory Device
IPMB Event Receiver
IPMB Event Generator
Chassis Device
Aux Firmware Rev Info :
0x00
0x00
0x00
0x00
Show SoL settings (optional):
[root@router01 ipmitool-1.8.9]#
src/ipmitool -I lanplus -H 10.0.1.145 -U admin -P admin sol info
Set in progress : set-complete
Enabled : true
Force Encryption : false
Force Authentication : false
Privilege Level : USER
Character Accumulate Level (ms) : 50
Character Send Threshold : 30
Retry Count : 0
Retry Interval (ms) : 100
Volatile Bit Rate (kbps) : 19.2
Non-Volatile Bit Rate (kbps) : 19.2
Payload Channel : 1 (0x01)
Payload Port : 623
Adjust serial baud-rate to 115.2 kBaud (required):
[root@router01 ipmitool-1.8.9]#
src/ipmitool -I lanplus -H 10.0.1.145 -U admin -P admin sol set non-volatile-
bit-rate 115.2
Connect to AM4204 serial interface via SOL:
[root@router01 ipmitool-1.8.9]#
src/ipmitool -I lanplus -H 10.0.1.145 -U admin -P admin sol activate
[SOL Session operational. Use ~? for help]
~ #
Check board information (optional).:
~ #
/mnt/bin/ipmitool fru
FRU Device Description : Builtin FRU Device (ID 0)
Board Mfg : Kontron
Board Product : AM4204
Board Serial : 1000749470
Board Part Number : T5516AB##