Kontron AM4204 - Manual (Page 36)

21 AM4204
www.kontron.com
Board Extra : MAC=00:A0:A5:5D:23:9E/10
Product Manufacturer : Kontron
Product Name : AM4204
Product Part Number : T5516AB##
Product Version : 00
Product Serial : 1000749470
Product Asset Tag : 0000000000
~ #
The following example shows parts of a serial output of the boot process:
~ #
~ #
reboot
The system is going down NOW !!
Jan 1 00:30:36 (none) daemon.info init: The system is going down NOW !!
Sending SIGTERM to all processes.
Jan 1 00:30:36 (none) daemon.info init: Sending SIGTERM to all processes.
Jan 1 00:30:36 (none) syslog.info System log daemon exiting.
Requesting system reboot.
128)
Restarting system.
U-Boot 1.1.1 (Development build) (Build time: Jun 5 2008 - 17:05:55)
Measured DDR clock 399.96 MHz
CUST_KONTRON_T5516 board revision major:0, minor:0, serial #:
OCTEON CN5750-SSP pass 1.1, Core clock: 600 MHz, DDR clock: 400 MHz (800 Mhz data rate)
PLD version: 4 Board Type: 0 Board Option: 2 Board Revision: 0
Performing MMC handshake ...done
Reset Type: 00 warm reset, Source: 08 Software Initiated
DRAM: 2048 MB
Flash: 128 MB
[...]
/sbin/rc starting
Updating module dependencies
Loading IPv6 module
Mounting file systems
Setting up loopback
Starting syslogd
Jan 1 00:00:06 (none) syslog.info syslogd started: BusyBox v1.2.1
Starting telnetd
Mounting /dev/mtd4 to /mnt
Execute /mnt/etc/rc.local
cavium-ethernet: Cavium Networks Octeon SDK version 1.8.1, build 244
Interface 0 has 4 ports (SGMII)
Interface 1 has 4 ports (SGMII)
Interface 3 has 4 ports (LOOP)
Configure eth6 / SFP0 for IP 192.168.0.100/24
Start DHCP client on eth0 / AMC Port 0
udhcpc (v1.2.1) started
[...]
adding dns 192.168.50.2
/sbin/rc Jan 1 00:00:09 (none) daemon.info init: Starting pid 904, console /dev/ttyS0: '/
bin/sh'
BusyBox v1.2.1 (2008.06.05-14:58+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.