Kontron mITX-E38 - Manual (Page 35)

KTD-N0903-A Page 33 Internal Connectors
mITX-E38 Users Guide
The GPIO’s are controlled via the ITE IT8516F Embedded Controller. Each GPIO has 100pF to ground,
clamping Diode to 3V3 and has multiplexed functionality. Some pins can be DAC (Digital to Analogue
Converter output), PWM (Pulse Width Modulated signal output), ADC (Analogue to Digital Converter input),
TMRI (Timer Counter Input), WUI (Wake Up Input), RI (Ring Indicator Input) or some special function.
Signal IT8516F pin name Type Description
GPIO0 DAC0/GPJ0 AO/IOS
GPIO1 DAC1/GPJ1 AO/IOS
GPIO2 DAC2/GPJ2 AO/IOS
GPIO3 DAC3/GPJ3 AO/IOS
GPIO4 PWM2/GPA2 O8/IOS
GPIO5 PWM3/GPA3 O8/IOS
GPIO6 PWM4/GPA4 O8/IOS
GPIO7 PWM5/GPA5 O8/IOS
GPIO8 ADC0/GPI0 AI/IS
GPIO9 ADC1/GPI1 AI/IS
GPIO10 ADC2/GPI2 AI/IS
GPIO11 ADC3/GPI3 AI/IS
GPIO12 ADC4/WUI28/GPI4 AI/IS/IS
GPIO13 RI1#/WUI0/GPD0 IS/IS/IOS
GPIO14 RI2#/WUI1/GPD1 IS/IS/IOS
GPIO15 TMRI0/WUI2/GPC4 IS/IS/IOS
GPIO16 TMRI1/WUI3/GPC6 IS/IS/IOS
GPIO17 L80HLAT/BAO/WUI24/GPE0 O4/O4/IS/IOS
AO = Analogue Output
IOS = Digital Input or Output 4, 8, 12 or 16 mA, Open-Drain option.
O4 = Output 4mA
O8 = Output 8mA
AI = Analogue Input
IS = Digital Input
Available cable kit and Break-Out-Board:
PN 1052-5885 Cable, Feature 44pol 1 to1, 300mm
PN 820978 Feature BOB (Break-Out-Board)
Note, the FAN3, FAN4 and OpenCASE# features on the BOB are not supported by the mITX-E38.