Kontron mITX-E38 - Manual (Page 31)

KTD-N0903-A Page 29 Internal Connectors
mITX-E38 Users Guide
Internal USB Connectors (USB6 – J21) 7.8
USB Port 6 is supplied on the internal 10-pin- row connector USB6. Only available at E3845.
Header Pin Signal Description Type
1 5V 5V protected by separate 1A resettable fuse PWR
2 - NC
3 USB6- Differential pair 6 -
DSIO-3.3
4 - NC
5 USB6+ Differential pair 6 + DSIO-3.3
6 - NC
7 GND Ground PWR
8 GND Ground PWR
- - (pin not mounted -Used for keying)
10 - NC
In order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.
Signal Description
USB6+ USB6- Differential pair works as Data/Address/Command Bus.
5V 5V supply for external devices. Protected by 1.0A current limiting circuit.