Kontron mITX-E38 - Manual (Page 20)

KTD-N0903-A Page 18 Rear IO Connectors
mITX-E38 Users Guide
USB Connectors (IO Area) 6.3
The mITX-E38 board contains support for one external USB3.0/2.0 port (USB0) and two external USB2.0
ports (USB1 and USB2).
(Three internal USB2.0 ports are available via internal pin connectors and one USB2.0 port is available via
mPCIe slot)
USB 2.0 ports allowing data transfers up to 480Mb/s. The USB 3.0 port allowing data transfers up to 5Gb/s.
Legacy Keyboard/Mouse and wakeup from sleep states are supported. Over-current detection on all USB
ports is supported. The following USB connectors are available in the IO Area.
For USB2.0 cabling it is required to use only HiSpeed USB cable, specified in USB2.0 standard:
For USB3.0 cabling it is required to use only HiSpeed USB cable, specified in USB3.0 standard:
Note that in order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.